Importing Garmin gpx files with MapSource

Does this forum software have you completely befuddled? Use this forum to look for tips or ask for help.

Importing Garmin gpx files with MapSource

Postby ken » Sun May 12, 2013 4:50 pm

Here is a step-by-step procedure to download a Garmin gpx file.
Right-click on the file to download, and select “Save target as…” as shown below.
gps1.jpg (144.79 KiB) Viewed 2684 times

A dialog box like the one below should appear. Navigate to the folder where your Garmin files are normally stored. If you use MapSource it should be “My Garmin.”
gps2.jpg (130.45 KiB) Viewed 2684 times

Internet Explorer will probably suggest naming it with the extension “xml”, which would cause problems loading the route with MapSource, so you should change the “xml” to “gpx” before saving it.
gps3.jpg (128.87 KiB) Viewed 2684 times

Once you’ve downloaded (saved) the file, fire up MapSource and open the file.
gps4.jpg (57.33 KiB) Viewed 2684 times

Make sure to select the “gpx” format in the file type pull-down list at the lower right part of the Open file dialog.
gps5.jpg (198.56 KiB) Viewed 2684 times

Select “gpx” from the file type list.
gps6.jpg (203.48 KiB) Viewed 2684 times

gps7.jpg (176.48 KiB) Viewed 2684 times

Once you’ve loaded the file you’ll need to Recalculate Route before sending it to your Garmin unit.
gps8.jpg (202.16 KiB) Viewed 2684 times

Click on the Transfer to Unit icon to upload the route info to the Garmin unit.
gps8a.jpg (47.45 KiB) Viewed 2684 times

You can upload to the Garmin unit if you have it connected to your computer, or, if you pull the memory card from the unit and insert it into a card reader slot on your computer, you can upload it there.
gps9.jpg (57.02 KiB) Viewed 2684 times

Disconnect the Garmin unit from your computer and make sure it starts up normally. If you uploaded the route data to your memory card, re-insert it into the Garmin unit and turn it on. It should automatically find the new route data and ask you if you want to import them.
If there are Waypoints in the file, import them first, then import the route or routes.
Eat. Ride. Repeat.
User avatar
Posts: 1170
Joined: Mon Jan 26, 2009 10:35 am
Location: Sacramento, CA

Return to Help Forum

Who is online

Users browsing this forum: No registered users and 1 guest