Machine shop needed

Want to discuss the relative merits of the GS vs the RT? Or need help adjusting your brake cables? This is the place.

Machine shop needed

Postby tjrob2000 » Mon Jun 01, 2015 4:55 pm

Anyone know a good machine shop for working on the oilhead cylinder heads? I have a valve cover screw broken off in a hole that I just put a thread insert in. I've removed the head and will also remove the right cylinder head and have thread inserts put in all the screw holes. This way I'll never have to deal with stripping out threads again.
tjrob2000
 
Posts: 25
Joined: Fri Nov 08, 2013 7:37 am

Re: Machine shop needed

Postby everin » Thu Jun 04, 2015 10:05 pm

Meticulous Metal, Loomis, CA
(916) 652-9309
Scott A. Moseman
2013 R1200GS
BMWMOA #196924
"A challenging day of riding trumps a productive day at the office."
User avatar
everin
 
Posts: 48
Joined: Sun May 03, 2015 6:08 pm
Location: Lincoln, CA

Re: Machine shop needed

Postby Jadoca » Thu Jun 04, 2015 10:24 pm

everin wrote:Meticulous Metal, Loomis, CA
(916) 652-9309


+1
Jadoca
 
Posts: 30
Joined: Fri Sep 24, 2010 6:14 pm

Re: Machine shop needed

Postby tjrob2000 » Mon Jun 08, 2015 7:53 am

Thanks,

Got them from A&S as well, but good to know others recommend them.

Tom
tjrob2000
 
Posts: 25
Joined: Fri Nov 08, 2013 7:37 am

Re: Machine shop needed

Postby RocklinMike » Mon Jun 08, 2015 2:51 pm

Sure you know this now TJROB , not much torque is needed on the valve covers. Really common mistake. Luckily I read about that before my first valve check on my oilhead . Reckon the same applies to all boxer valve covers. Counterintuitive I guess, but my covers never seaped or leaked with not a lot of torque on reinstallation. This comment is not directed to you in particular, but to all who do their own maintenance.
2016 Polaris Slingshot
2013 R1200GSA
2005 R1200GS
2013 R1200GS (Stofer WTRBXR)
BMWMOA # 139904
RCB 2008
IBA #50412
User avatar
RocklinMike
 
Posts: 560
Joined: Mon Jan 26, 2009 2:05 pm
Location: rocklin, ca.


Return to Motorcycle Discussions

Who is online

Users browsing this forum: No registered users and 1 guest